Cable Gland and Locknut Application range In areas with high demands on special mechanical and chemical stability. Chemical industry. Measurement and control technology. Machine and apparatus construction. Plant engineering and construction. Needed wherever a gland has to be countered or thin walled housings only allow through holes. Benefits Maximum reliability. Optimal strain relief. Large, variable clamping ranges. For cable diameters up to 68mm. Design Metric connection thread acc. to EN 50262. PG connection thread. Note Counter nut to be used SKINDICHTSM. For suitable accessories see SKINTOP accessories PG. Counter nut to be used SKINDICHTSM-M. For suitable accessories see SKINTOP accessories. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <1> 07/06/10 V1.0 Cable Gland and Locknut Cross-References SKINTOPMSR-M. Accessories SKINDICHTSM-M, SKINTOPDIX-M, SKINTOPDIX-M Automation, SKINTOPSDV-M ATEX, SKINTOPSD-M, SKINTOPDV-M. Technical date Caution Installation dimensions and tightening torques see appendix T21. Approvals UL, CSA, DNV approval for size M75 x 1,5 pending. Material Body : Nickel plated brass Insert : Polyamide seal: CR O-ring: NBR. Nickel-plated brass. Degree of protection IP 68-10 bar. IP 69 K pending. IP 68-5 bar. Rage of temperature -30C up to +100C. Article List Part Number 52015700 + 52003490 Part Designation/ Size Height (mm) SW (mm) Thread Length D (mm) MS 7 - 14 5 SM 7 2.8 15 - Pieces /PU Thickness in (mm) Outer O (mm) Clamping Range O F (mm) Overall Length C (mm) - - 2 - 6.5 25 - - - - 100 52015710 + 52003500 MS 9 - 17 6 - - 4-8 29 SM 9 2.8 18 - - - - - 52015720 + 52003510 MS 11 - 20 6 50 - - 4 - 10 32 SM 11 3 23 - 100 - - - - 52015730 + 52003520 MS 13.5 - 55 6.5 50 - - 5 - 12 34 SM 13.5 3 23 - 100 - - - - http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <2> 07/06/10 V1.0 Cable Gland and Locknut Article List Part Number 52015740 + 52003530 Part Designation/ Size Height (mm) MS 16 SM 16 53112000 + 52103000 12 x 1.5 53112010 + 52103010 16 x 1.5 53112020 + 52103020 20 x 1.5 53112030 + 52103030 SW (mm) Thread Length D (mm) Pieces /PU Thickness in (mm) Outer O (mm) Clamping Range O F (mm) Overall Length C (mm) - 24 6.5 50 - - 8 - 14 35 3 26 - - - - - - - 6.5 - - 3-7 26.5 - 15 - 3 16.5 - - - - 7 - - 4.5 - 10 32 - 19 - 20.9 - - - - - 8 50 - - 7 - 13 35.5 - 24 - 100 3.5 26.4 - - - - 8 25 - - 9 - 17 37.5 - 30 - 100 4 33 - - 100 25 x 1.5 Part Number Table Description Part Number Table Gland, Brass, PG7, PK10 52015700 + 52003490 Gland, Brass, PG9, PK10 52015710 + 52003500 Gland, Brass, PG11, PK10 52015720 + 52003510 Gland, Brass, PG13.5, PK10 52015730 + 52003520 Gland, Brass, PG16, PK10 52015740 + 52003530 Gland, Brass, M12, PK10 53112000 + 52103000 Gland, Brass, M16, PK10 53112010 + 52103010 Gland, Brass, M20, PK10 53112020 + 52103020 Gland, Brass, M25, PK10 53112030 + 52103030 Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC pro-Power is the registered trademark of the Group. (c) Premier Farnell plc 2010. http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Page <3> 07/06/10 V1.0